What Are The Configuration Requirements Of The Laser Cutting Machine

What are the configuration requirements of the laser cutting machine
The processing and application of laser cutting machine has advantages in processing large thickness steel plate. However, with the increase of the flame perforation thickness, the temperature and environmental requirements of the equipment will be more strict. At present, the cutting thickness of the laser cutting machine has exceeded 1000mm, how to achieve such an amazing cutting thickness, the key lies in the configuration and combination of the cutting gas.
Laser cutting machine processing involves different types of gas mixture in order to improve the cutting quality and efficiency, similar cutting gas combination on the relevant parameter setting is also different in the current domestic mainstream laser cutting machine equipment using parameter preset way, in the early stage of the cutting processing by personnel input related cutting parameters, including preheating time, cutting speed, cutting torch height of different parameters are really suitable for this material cutting processing? The following Xiaobian want to talk about our views on this issue.
To cut gun flame skilled control key on gas source, the scene of the most oxygen for pipeline oxygen, oxygen purity and pressure can generally meet the use requirements, but the gas for bottled gas, 30 kg bottle of gas, in the scale of 5 machine 5 flow, use time in about 2 hours, the middle must replace the gas source, this will cause the gas pressure fluctuation, directly affect the gas flow, cause abnormal cutting each bottle gas use process at the beginning and the end of the bottled gas pressure fluctuates greatly the scene with warm water heating is a good way to ensure the stability of the gas source.
Laser cutting machine in the use of gas combustion of high temperature cutting material at the same time, in order to ensure cutting quality effect, generally cutting gas has qualitative and quantitative requirements, including the purity of cutting gas, pressure and ratio, etc., in the actual operation of laser cutting machine, there are many need to pay attention to, in addition to the basic cutting speed, cutting thickness has the height of cutting, also need to pay attention to cutting gas. In order to ensure the integrity of the current equipment, usually should be based on the operating procedures, regularly check the leakage of pipes and joints, bearings, pin holes and other places refueling lubrication, clean the nozzle, cooling water pipe, complete some daily procedural work, in order to ensure the normal operation.
These are the specific requirements of the configuration of the fiber laser cutting machine, we must not ignore the use of laser cutting machine.